Brocade Communications Systems RFS6000 - Manual (Page 632)

630 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Wireless configuration commands
20
hotspot
Wireless configuration commands
Configures the WLAN hotspot configuration
This overrides or adds to the existing hotspot configuration on the WLAN.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
hotspot query
[ap-mac|mu-mac||ssid|mu-ip|controller-ip|controller-name|user-string]
Parameters
Example
RFController(config-wireless)# hotspot query 1 user-name user-string
RFController(config-wireless)# hotspot query 2 from client-ip
RFController(config-wireless)#
The index of this query in the query list. Can be in the range of 1
and 10.
[
controller-ip||ssid
|mu-mac|mu-ip|
controller-name|
user-string] The name of the field in the URL whose value is substitute with
the parameters
•
ap-mac – AP MAC address of the MU.
•
controller-ip – The controller’s router ip-address for the
external hotspot server
•
mu-mac – MAC address of teh MU.
•
ssid – The WLAN’s SSID
•
mu-ip – The MU’s IP address
•
controller-name – The controller’s name on the network
•
user-string – Specifies that the value of the query is a user
string.