Brocade Communications Systems RFS6000 - Manual (Page 518)

516 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
DHCP Config commands
17
ddns
DHCP Config commands
Sets dynamic DNS parameters
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
ddns [domainname|multiple-user-class|server|ttl]
ddns domainname
ddns multiple-user-class
ddns server
ddns ttl <1-864000>
Parameters
Usage Guidelines
Use
update dns override
to enable an internal DHCP server to send DDNS updates for
resource records (RRs) A, TXT and PTR. A DHCP server can always override the client even if the
client is configured to perform the updates.
In the DHCP server network pool, FQDN is defined as the DDNS domain name. This is used
internally in DHCP packets between the DHCP server on the controller and the DNS server.
Example
RFController(config-dhcp)#ddns domainname TestDomain.com
RFController(config-dhcp)#
RFController(config-dhcp)#ddns multiple-user-class
RFController(config-dhcp)#
RFController(config-dhcp)#ddns ttl 1000
RFController(config-dhcp)#
domainname Sets the domain name used for DDNS updates
multiple-user-class Enables the multiple user class option
server Specifies the server to which DDNS updates have been
sent
•
– Defines an IP address in dotted decimal
format
ttl <1-864000> Sets a Time To Live (TTL) value for DDNS updates
•
<1-864000> – TTL value in seconds