Brocade Communications Systems RFS6000 - Manual (Page 615)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 613
53-1001931-01
Wireless configuration commands
20
RFController(config-wireless)# wlan 1 nac-server primary 192.168.0.1
RFController(config-wireless)# wlan 1 nac-server primary secret 0 testing
RFController(config-wireless)# wlan 1 nac-server secondary 192.168.1.1
RFController(config-wireless)# wlan 1 nac-server secondary secret 0 testing123
• Enable NAC for a WLAN.
RFController(config-wireless)# wlan 1 nac-mode do-nac-except-exclude-list
• Undo a configuration.
RFController(config-wireless)# client exclude-list protected-hosts
RFController(config-wireless-client-client)# no station testing-host1
RFController(config-wireless)# no client exclude-list protected-hosts
RFController(config-wireless)# no wlan 1 nac-server primary
RFController(config-wireless)# no wlan 1 nac-server primary secret
RFController(config-wireless)# no wlan 1 nac-server secondary
RFController(config-wireless)# no wlan 1 nac-server secondary
radius-key
RFController(config-wireless)# no wlan 1 nac exclude-list
protected-hosts
config-wireless-client-list commands
Use
(config-wireless)# client
to enter the (
config-wireless-client-list)
instance. Use
this instance, to create an exclude list or include list.
This table summarizes
config-wireless-client-list
commands:
station
config-wireless-client-list commands
Adds a specified MAC entry into the client’s exclude or include list
Syntax
config-wireless-client-list station [|
]
Command Description
clrscr Clears the display screen
end Ends the current mode and moves to the EXEC mode
exit Ends the current mode and moves to the previous mode
help Displays the interactive help system
no Negates a command or sets its defaults
service Provides a means of troubleshooting and debugging
show Displays running system information
station Defines a Client’s MAC configuration
wlan Sets Wireless LAN related parameters