Brocade Communications Systems RFS6000 - Manual (Page 639)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 637
53-1001931-01
Wireless configuration commands
20
multicast-packet-limit
Wireless configuration commands
Sets a multicast packet limit, per second, for a VLAN. This limits the broadcast/multicast packets
per VLAN. The default value is 32 broadcast/multicast packets per second. Setting the limit to 0
disables this control.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
multicast-packet-limit <0-128> [|]
Parameters
Example
RFController(config-wireless)#multicast-packet-limit 120 50
RFController(config-wireless)#
RFController(config-wireless)#multicast-packet-limit 120 1,10,25
RFController(config-wireless)#
<0-128> Sets the multicast packet limit per second.
Defines the single VLAN ID in the range 1-4094 the new limit
applies to.
Defines a list of VLAN IDs in the format 1,3,7 or range 3-7 of VLAN
IDs