Brocade Communications Systems RFS6000 - Manual (Page 322)

320 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Global Configuration commands
5
wwan
Global Configuration commands
Configures wireless wan interface
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
NOTE
This command is not supported on the Mobility RFS7000 Controller.
Syntax
wwan [apn|disable|enable|password
|username]
Parameters
Example
RFController(config)#wwan disable
RFController(config)#
RFController(config)#no wwan apn
RFController(config)#
apn Enter the access point name provided by the service provider.
– A string of up to 25 characters
NOTE: Use this command for countries in Europe. This command
is not valid for other countries.
disable Disables the wireless wan feature
enable Enables the wireless wan feature
password Enter password provided by the service provider
– A string of up to 30 characters
username Enter username provided by the service provider
– A string of up to 32 characters