Xerox WorkCentre M24-3946 - Manual (Page 166)

S
e
tti
ng up System Admi
ni
strati
on Mo
de (F
ax
F
uncti
ons)
142
9
9.1
Overview of System Adminis-
tration Mode (Fax Functions)
The System Administration Mode is used for changing machine default values, image qual-
ity and machine status.
Fax functions are set, entered or changed using the System Settings button and the Setup
Menu button in the System Settings screen while in the System Administration Mode.
Machine functions are set to certain values (default values) at the factory before shipping.
Some of these values can be changed by the customer. Customize frequently used func-
tions so that you will not have to change them each time you use them. These functions
return to the values (default values) in the System Administration Mode under the following
conditions.
The machine cannot receive documents in the System Administration Mode.
● When the power is turned on ● After recovery from the Power Saver Mode
● When the Clear All button is pressed ● After starting transmission
Close System Settings
System Settings
Auditron
Administration
Setup Menu System Administrator
Password