Xerox WorkCentre M24-3946 - Manual (Page 80)

4.3 Transmitting Documents Through a Remote Relay Station (Remote Relay Broadcast)
56
4
B
roadc
ast Sen
d
For details on how to register Address Numbers, see “9.3 Setting an Address Number” (P. 150).
Sending automatically (without picking up the handset)
The dialing format is as follows.
● This method is available for transmission only between machines of this model.
● The above dialing format can be registered in Address Number to enable dialing using an Address
Number. For details on how to register Address Numbers, see “9.3 Setting an Address Number”
(P. 150).
Procedure
1
Load documents.
“2.2 Loading Documents” (P. 14)
2
Display the Fax screen.
Where What is required
First relay
station
● Assign the initiating station to an Address Number from 001 to 500, and set
Relay Station Setup of the Address Number to On.
● Assign the second relay station to an Address Number from 001 to 500.
• Program the two last digits of the Address Number of the first relay station
(which is already programmed at the second relay station) as a relay sta-
tion ID for the Relay Broadcast Send operation.
• Program the Address Numbers of the destinations (which are already pro-
gramed at the second relay station) as broadcast receivers.
Second
relay
station
● Assign the first relay station to the same Address Number as that of the ini-
tiating station programmed at the first relay station, and set Relay Station
Setup of the Address Number to On.
● Program the destinations to Address Numbers between 001 and 500.
Address
Number
Relay
station ID
Password The 1st relay station
telephone number
Menu Basic Features Scan Options Send Options
On-Hook/
Others
A B C
Text & Photo
Text
Photo
Fine
Standard
Super-fine (400dpi)
Super-fine (600dpi)
Address Book
Keyboard
Resolution Original Type Lighter/Darker
Next
Recipient
Enter recipient’s Fax No. Memory :100%
[ Fax No. ]