Xerox WorkCentre M24-3946 - Manual (Page 175)

9.3 Setting an Address Number
151
S
e
tti
ng up System Admi
ni
strati
on Mo
de (F
ax
F
uncti
ons)
9
● For details on how to enter characters, see “1.5 Entering Text” (P. 8).
● If you assign Relay Broadcast to Address Numbers from 001 to 090, you can use a one touch button on the control
panel to perform Relay Broadcast. It is recommended that such a button be appropriately labeled to prevent incor-
rect transmissions.
8 Cover Note Determines whether or not a Cover Note is to be attached.
When attached, enter a comment under To (Recipient) or
From (Sender).
Comments must be programmed beforehand. For details on how to
enter comments, see “9.5 Setting a Comment” (P. 171).
Off
9 Maximum
Image Size Set Maximum Image Size to A3 / 11", B4 or A4 / 8.5" for the
remote machine as dictated by its maximum receiving docu-
ment size. A3 / 11"
10 Delayed Start Determines whether or not a Delayed Start is to be made.
Enter the start of transmission when this function is to be used. Off
11 Remote Mailbox Determines whether or not Remote Mailbox is to be used. To
use this function, enter a Remote Mailbox Number and Pass-
word.
You must know the Remote Mailbox Number and Password of the
remote machine before Remote Mailbox can be used.
Off
12 F Code Set whether or not to do F Code transmission. To do F Code
transmission, set the F Code and password. Off
13 Relay Broadcast Enter the instructions in the relay station when the registered
Address Number is to be used as a relay station and this
machine is the initiating station in a Relay Broadcast. When On
is selected, enter Relay Station ID, Broadcast Recipients and
Print at Relay Station. Off
No. Item Description
Default
value