Xerox WorkCentre M24-3946 - Manual (Page 55)

3.4 Dialing
33
Tran
sm
itt
ing
3
3.4.6 Entering Symbols
You can use the following features for dialing by entering the appropriate sym-
bols on the touch panel display.
Feature Symbol Description How to use
Enter pause - or pause
(-)
One pause is three sec-
onds. You can enter
pauses of six seconds, nine
seconds, etc. by additional
button presses.
Press the (pause) but-
ton.
(Example)
0-123...
0- -123...
Transmit
using a pass-
word S Use a password to prevent
transmission errors.
When a password has been
set, transmission will only
start if the password
matches the ID number on
the remote terminal. 1. Select the Keyboard
button in the Basic Fea-
tures screen to display
the keyboard.
2. Select the PQRST but-
ton and the Shift button.
3. Select the S button.
(Example)
0312345678S12345678
Transmit
DTMF signal ! Use to transmit the DTMF
signal. 1. Select the Keyboard
button in the Basic Fea-
tures screen to display
the keyboard.
2. Select the Symbol but-
ton.
3. Select !.
(Example)
0311123456!123#
Transmit PB
(from dial
pulse to tone) : Switches the dial type from
pulse to tone when the Fax
service is used. 1. Select the Tone (:) but-
ton on the On-hook or
Off-hook screen.