Xerox WorkCentre M24-3946 - Manual (Page 286)

13.2 Setting the Environment
262
13
Using
the
In
te
rn
et
to
Send
and
Receive F
axes
13.2.2 Environment Setting
It is necessary to set the items in advance to use the iFax feature.
Flow of the Environment Setting
Set the environment with the following steps.
Use the Touch Panel Display or Internet Services and set up the IP address
for the machine. For details on setting operation, see “13.2.3 Setup the Envi-
ronment” (P. 266).
Use Internet Services to Activate the port for Sending E-mails and Receiving
E-mails in the Activate the port. For details on setting operation, see “13.2.3
Setup the Environment” (P. 266).
Use Internet Services to set up the E-mail and the TCP/IP environment.
See “
Setting Information” (P. 263) in “13.2.2 Environment Setting”. For
details on setting operation, see “13.2.3 Setup the Environment” (P. 266).
See “13.2.4 Confirming the Settings” (P. 269) to print out the Features Set-
tings List and check the settings.
See “13.3.1 Sending E-mails” (P. 270) and send an E-mail to the address of
the machine to make sure that the setting is correct. If the E-mail cannot be
sent, check the environment setting.
Set up the IP Address
Activate the Port
Set up the E-mail and the TCP/IP environment
Confirming the settings
Send E-mails