Xerox WorkCentre M24-3946 - Manual (Page 34)

2.1 Documents
12
L
o
adi
ng D
o
cuments
2
2.1.3 Document Handling
Pay attention to the following when placing documents on the document glass or
in the document feeder
Document Glass
Since the following document types are not automatically detected, an error
message may appear or the entire image may not be scanned.
Use the listed procedures to solve this problem.
● Do not load excessively wet documents. Such documents exposes the machine to water and may
damage it.
● Do not load a document of a weight greater than 5 kg. Such a document could damage the docu-
ment glass and the machine.
Documents placed in a photograph holder may not be scanned correctly if the film is severely creased.
For details on the scanning size function, see “8.2 Specifying Document Size for Transmission (Scan
Size)” (P. 87).
Documents
(for facsimile)
Procedure
Non-standard size docu-
ment Specify the closest standard size using Scan Size on the
Scan Options screen.
Glossy documents
Thick documents (maga-
zines or the like)
Highly transparent materi-
als such as transparencies Place a sheet of white paper the same size as the document
on top of it.
Specify the document size using Scan Size on the Scan
Options screen.
Torn, creased, perforated
or excessively curled docu-
ments