Xerox WorkCentre M24-3946 - Manual (Page 221)

9.8 Other Items
197
S
e
tti
ng up System Admi
ni
strati
on Mo
de (F
ax
F
uncti
ons)
9
16. 2 Sided Printing
This function allows the machine to print received documents (included iFAX received document) or
reports onto both sides of a sheet. This is effective in saving paper.
Referring to the table below, use the numeric keypad to enter the desired value. The default value 0 is Off.
Some data may not permit you to print on both sides of a sheet even when this function is set to On.
17. Doc. Feeder Detect Method
This function allows you to select whether size detection in the document feeder is to be performed
using the A/B system or inch system.
Referring to the table below, use the numeric keypad to enter the desired value. The default value 0 is
A/B system.
For details on documents, see “Chapter 2 Loading Documents” (P. 9).
18. Reduce 8.5 × 11" Original to A4
When Reduce/Enlarge in the Scan Options screen is set to Auto %, it is possible to select whether or
not a received 8.5 × 11 inch
document is to be reduced to A4 size .
Referring to the table below, use the numeric keypad to enter the desired value. The default value 0 is
Same Size.
For details on documents, see “Chapter 2 Loading Documents” (P. 9) and for details on Reduce/Enlarge, see
“8.4 Scanning Documents at a Specified Size/Ratio (Reduce/Enlarge)” (P. 93).
19. Pseudo-Photo Gradation Mode
This function performs grey level correction for documents containing photographs.
Referring to the table below, use the numeric keypad to enter the desired value. The default value 0 is
Error Diffusion.
Setting value Description
0 Off
1 On
Setting value Description
0 A/B system
1 Inch system
Setting value Description
0 Same Size
1 Reduced to A4 size
Setting value Description
0 Error Diffusion
1 Dithering