Xerox WorkCentre M24-3946 - Manual (Page 79)

4.3 Transmitting Documents Through a Remote Relay Station (Remote Relay Broadcast)
55
B
roadc
ast Sen
d
4
2
Display the Fax screen.
3
Select an Address Number to which a remote relay broadcast is pro-
grammed and press Start.
Scanning and transmission begins.
● For details on how to dial a number, see “3.4 Dialing” (P. 27).
● For details on how to confirm and cancel the transmission of a document, see “Chapter 5 Confirm-
ing and Canceling a Communication” (P. 61).
4.3.2 DTMF (Dual Tone Multi Frequency)
Method
Before using the DTMF method, program the following items.
There are two DTMF methods: automatic transmission and manual transmis-
sion.
■
Password
A two-digit number programmed beforehand.
(The factory-set default is none.) For setting Password, contact our Customer Support Center. If a
password has not been programmed, you do not need to use one.
■
Relay station ID
The last two digits of the assigning station Address Number registered at the first
relay station.
■
Address Number
An Address Number for the second relay station registered at the first relay sta-
tion.
Before using the fax signal method, program the first relay station and the sec-
ond relay station in Address Number.
Menu Basic Features Scan Options Send Options
On-Hook/
Others
A B C
Text & Photo
Text
Photo
Fine
Standard
Super-fine (400dpi)
Super-fine (600dpi)
Address Book
Keyboard
Resolution Original Type Lighter/Darker
Next
Recipient
Enter recipient’s Fax No. Memory :100%
[ Fax No. ]