Xerox WorkCentre M24-3946 - Manual (Page 248)

224
10
R
e
por
ts
/L
ist
s
10.10
Relay Broadcast Report
The Relay Broadcast Report allows you to check the Relay Broadcast results.
The Relay Broadcast Report is printed when set to print automatically. It cannot be printed
manually.
When set to print automatically, it is printed automatically after a Relay Broadcast opera-
tion.You can also have the report transmitted to the initiating station. For details on settings,
see “10.2.2 Printing Reports and Lists Automatically” (P. 207).
Item Description
No. The serial numbers for transmissions is shown.
Doc. Job numbers that the machine automatically assigned to
documents when the documents were received.
Remote Station Information on recipient to which transmission is made is
recorded in the following order of priority.
■
Transmitting (speed dialing)
Recipient
Remote terminal name
G3 ID (including spaces)
Tel No.
Communication mode EC (or G3, SG3)
■ Transmitting (when all digits are dialed)
Remote terminal name
G3 ID (including spaces)
Tel No.
Communication mode EC (or G3, SG3)
■
Receiving
Remote terminal name
G3 ID (including spaces)
Communication mode EC (or G3, SG3)
Start Time The date and time that the communication began are shown.
In Batch Send, the start time of the transmission for each
document is recorded.
Duration The communication length is indicated. In Batch Send, the
length of time taken for a transmission for each document is
recorded.
Pages “-” is indicated when the number of pages is 0.
■
Transmitting
The number printed on the left side of the slash “/” indicates
the number of pages that were successfully transmitted. The
number printed on the right side of the slash “/” indicates the
number of total pages.In Manual Send, the number of total
pages is not shown.
■
Receiving/Polling
The number of pages that the machine successfully received
is shown.
1
2
3
4
5
1
2
3
4
1
2
3