Xerox WorkCentre M24-3946 - Manual (Page 145)

8.14 Using the Mailbox Feature (Remote Mailbox/Retrieve from Mailbox)
121
Us
in
g
Ad
di
ti
on
a
l F
e
at
ur
e
s
8
6
Use the numeric keypad to enter the Password and select Next.
If a password has not been programmed, you do not need to use one. Then select the Next button with-
out entering a password.
7
Select Save.
8
Dial a remote party, then press Start.
Scanning and transmission begins.
● For details on how to dial a number, see “3.4 Dialing” (P. 27).
● For details on how to confirm and cancel the transmission of a document, see “Chapter 5 Confirm-
ing and Canceling a Communication” (P. 61).
8.14.2 Send to Mailbox (DTMF Method)
To perform this operation, you must know the mailbox number of the remote
machine.
This refers to the mailbox number programmed on the remote machine.
There are two methods of sending to mailbox by DTMP as follows:
Sending to mailbox automatically
The dialing format is as follows.
Sending to mailbox manually
The dialing format is as follows.
Save Cancel
001
9
Remote Mailbox
On
Off
Remote Mailbox Number
(Example: 001, 010, 100)
Password
Next
Use the Numeric Keypad to enter the password.
Next
Recipient
Memory :100%
Telephone number of
remote machine
Mailbox number of remote machine Password for mailbox of remote machine
Confirm the
facsimile tone Confirm the continuous,
short high-pitched tone
The continuous,
short high-pitched
tone sounds
Telephone number
of remote machine Mailbox number of
remote machine
Password for mailbox
of remote machine Select Start