Xerox WorkCentre M24-3946 - Manual (Page 300)

13.3 Receiving and Sending E-mails
276
13
Using
the
In
te
rn
et
to
Send
and
Receive F
axes
Specifying iFax Profile
A profile is determined to restrict the attribute information for transmissions
between machines equipped with iFax, such as image resolution and paper size.
● Depending on the iFax features of the recipient, the profiles that can be processed vary. Confirm
the profile that can be processed by the recipient’s machine equipped with iFax before specifying
the profile.
● If a discordance occurs in combination of a profile, stored document size and resolution, setting
specified in profile will be given priority.
● If the profiles differ in each recipient for Relay Broadcast, the smallest size becomes the Max Image
Size.
● You can set iFax Profile for each recipient of the Address Number. See “9.3 Setting an Address
Number” (P. 150) for details on how to register Speed Dialing numbers.
● The default value for iFax Profile can be edited in the System Administration Mode. See “9.8.6
Feature Defaults” (P. 188) for details on entering text. The default factory setting is TIFF-S.
Select one of the following three profiles.
● TIFF-S ....... Standard specification of iFax for originals that are bigger than A4,
it reduces the size to A4 automatically for transmission.
● Data compression : MH
● Stored Document Size : A4
● Resolution : Standard, Fine
● TIFF-F ....... Select this profile for sending super-fine, A3, B4 originals.
● Data compression : MH, MMR
● Stored Document Size : A4, B4, A3
● Resolution : Standard, Fine, Super-fine (400dpi),
Super-fine (600dpi)
● If Super-fine (400dpi) or Super-fine (600dpi) in the Resolution on the Basic Features screen is
selected, TIFF-S cannot be selected.
● When a transmission is sent to a machine that does not support TIFF-F, the receiving machine will
not be able to display or print the images.
● TIFF-J ........ select this profile for sending originals in JBIG.
● Data compression : JBIG
● Stored Document Size : A4, B4, A3
● Resolution : Standard, Fine, Super-fine (400dpi),
Super-fine (600dpi)
When a transmission is sent to a machine that does not support TIFF-J, the receiving machine will not
be able to display or print the images.