Xerox WorkCentre M24-3946 - Manual (Page 210)

9.8 Other Items
186
S
e
tti
ng up System Admi
ni
strati
on Mo
de (F
ax
F
uncti
ons)
9
6. Broadcast/Multi-poll Report
You can determine whether or not a Broadcast/Multi-Poll Report is to be printed out automatically.
Referring to the table below, use the numeric keypad to enter the desired value. The default value 1 is
On.
7. Relay Broadcast Report
You can determine whether or not a Relay Broadcast Report is to be printed out automatically and
where it is printed out.
Referring to the table below, use the numeric keypad to enter the desired value. The default value 1 is
transmission to the initiating station.
8. 2 Sided Report
When printing a report/list, it sets up whether it prints to both sides.
Referring to the table below, use the numeric keypad to enter the desired value. The default values 0
is Off.
9.Recipient on Activity Report
You can determine how many digits of other party information is to be printed in the Activity Report.
Referring to the table below, use the numeric keypad to enter the desired value. The default value 0 is
displaying the first 40 digits.
9.8.5 Screen Defaults
This function sets Fax screen settings.
The following settings can be made using the Screen Defaults settings.
Setting value Description
0 Off
1 On
Setting value Description
0 Off
1 Transmission to initiating station.
2 Printed on this machine.
3 Transmitted to the initiating station and printed on this machine.
Setting value Description
0 Off
1 On
Setting value Description
0 The first 40 digits are indicated.
1 The last 40 digits are indicated.