Notes on fax communications, Telephone line connection, Automatic receive mode – Xerox WorkCentre M24-3946 User Manual
Page 25: Making a telephone call
Bef
o
re
Use
3
1
1.2
Notes on Fax
Communications
Follow the instructions described below when using the fax features on the machine.
1.2.1
Telephone Line Connection
You cannot use this machine with a call waiting service.
A facsimile located close to a main unit of a cordless phone can cause distorted
images or interrupted transmission.
This machine should be installed at least five meters away from the main unit of
the cordless phone.
If the digital line leased for your company network is multiplexed, facsimile com-
munication may be restricted as follows:
(1)
The features using our unique transmission method, such as Recipient Print
Sets, Relay Broadcast and Remote Mailbox, are not available.
(2)
The transmission speed is limited.
(3)
Super G3 cannot be used.
The following communication errors may also occur.
These restrictions may occur because the multiplexing device restricts the band-
width to the minimum required for voice communications. These restrictions vary
according to the network configuration.
For more information, contact your network administrator.
1.2.2
Automatic Receive Mode
If the telephone rings while the machine is in standby mode with the automatic
receive mode activated, you cannot speak with the caller.
When you want to answer a telephone call in this mode, connect an external
telephone and use the Auto Switch Time feature to change the time for the
machine to answer the call.
1.2.3
Making a Telephone Call
In power saving, you cannot make telephone call with the receiver.To make a
telephone call, press the Power Saver button to cancel power saving.