Xerox WorkCentre M24-3946 - Manual (Page 84)

4.3 Transmitting Documents Through a Remote Relay Station (Remote Relay Broadcast)
60
4
B
roadc
ast Sen
d
When doing remote Relay Broadcast Send among these types of machines, we recommend using the
fax signal method.
When this machine is a relay station, the F Code that is transmitted to the initiat-
ing station is as follows.
■
Relay Broadcast Send
The number of digits in the first relay station ID.
1: For first relay station IDs and Address Number that are 2 digits.
2: For first relay station IDs and Address Number that are 3 digits.
■
Print directive
Activate or deactivate printing at the first relay station.
1: Activate printing at the first relay station.
0: Deactivate printing at the first relay station.
■
First relay station ID
The Address Number of the initiating station that is assigned to the first relay sta-
tion.
The initiating station is notified of the results of the remote Relay Broadcast Send
when the first relay station ID is set.
The initiating station is not notified of the results of the remote Relay Broadcast
Send when the relay station ID is “00” or “000”.
■
Address Number
The Address Number assigned to the second relay station.
The procedure is the same for Relay Broadcast Send. See “4.2.4 F Code Method” (P. 49).
Relay Broadcast
Send Print
directive First relay
station ID Address
Number Address
Number Address
Number
....
Up to 20 digits