Xerox WorkCentre M24-3946 - Manual (Page 92)

Re
ceiving Job
s
68
6
6.1
Reception Mode
There are two reception modes: Auto Receive and Manual Receive.
In the Auto Receive mode, the machine automatically responds to transmissions from a
remote terminal.
In the Manual Receive mode, the machine begins reception after the handset has been
lifted and the ready tone of the remote machine sounded. This is useful if you wish to check
the sender or receive documents after speaking with the sender using an external tele-
phone.
The Fax Receiving Mode default value can be changed in the System Administration Mode. For details on how to
change this default value, see “9.8.7 Fax Control” (P. 192). The default factory setting is Auto Receive.
6.1.1 Switching Between the Modes
Procedure
1
Press Machine Status.
The Machine Status screen is displayed.
2
Select Fax Receiving Mode in the Machine Status screen.
The Fax Receiving Mode screen is displayed.
3
Select Manual Receive or Auto Receive.
4
Select Save.
Faults Consumables Billing Meter/
Print Report
Machine Status
Machine Information Paper Tray Print Mode
On-line
Fax Receiving Mode
Auto Receive
Save Cancel Print Mode
Auto Receive
Manual Receive