Xerox WorkCentre M24-3946 - Manual (Page 218)

9.8 Other Items
194
S
e
tti
ng up System Admi
ni
strati
on Mo
de (F
ax
F
uncti
ons)
9
6. Redial Attempt
When the line is busy, the machine can redial automatically. Sets the number of redialing attempts.
Referring to the table below, use the numeric keypad to enter the desired value. The default value
varies depending on the country.
To use this item, it must be set by an engineer.
This item does not function in some countries.
7. Redial Interval
This function sets the Redial Interval.
Use the numeric keypad to enter the desired value. A value from 1 up to 15 minutes can be set in 1
minute increments. The default value varies depending on the country.
To use this item, it must be set by an engineer.
This item does not function in some countries.
8. Transmission Interval
This function sets the period between transmissions. The longer the Transmission Interval, the longer
the total time spent for operations like Broadcast Send, but the machine can receive faxes during the
standby time.
Use the numeric keypad to enter the desired value. A value from 3 up to 255 seconds can be set in 1
second increments. The default value 8 is 8 seconds.
9. Batch Send
This feature automatically transmits several pending documents to an identical destination with a sin-
gle phone call thereby reducing telephone charges.
Note that Batch Send cannot be used together with Broadcast Send, Relay Broadcast Send, Remote
Mailbox, and Delayed Start before the specified time. Nor can transmissions to a single destination
from separate departments be batch processed when there are redialing, resending or delayed start
jobs.
Referring to the table below, use the numeric keypad to enter the desired value. The default value 1 is
Batch Send On.
Setting value Description
0 Off
1 to 9 The specified number of redial operations is performed.
Setting value Description
0 Batch Send Off
1 Batch Send On