beautypg.com

Network authentication, Setting up network authentication, Network authentication -4 – Xerox Color 550-560-570 Printer con Xerox CX Print Server powered by Creo-16023 User Manual

Page 58

background image

6.

To specify the Minimum Passcode Length, type the number of digits (4 to 12).
Type 0 if you do not want to specify a minimum passcode length.

7.

Click Apply to accept the changes or Undo to retain the previous settings.

Network Authentication

If you have an LDAP server connected to your network, you can configure the printer to
retrieve user information from the LDAP directory when authenticating a user at the
control panel.

Setting up Network Authentication

1.

In CentreWare Internet Services, click Properties > Security > Authentication
Configuration
.

2.

On the Authentication Configuration page, next toLogin Type, select Login to
Remote Accounts
.

3.

Select Enabled next to Print Stored File from Folder, or Enabled next to Folder to
PC/Server Enabled
to enable these services.

4.

Select Enabled next to Non-account Print to allow users without accounts to access
the printer.

5.

To allow a guest user to access the printer, selectOn next to Guest User. Type the
Guest Password, then retype the password to verify.

6.

To have the printer cache remote account information, select Enabled next to Save
remote accounts in this machine
. Specify if you want to have the cached
information deleted (click Delete Remote Accounts), and specify how often you
want to delete cached information by selecting a deletion day, month and time.

7.

Click Apply, then click Reboot Machine.

8.

After the printer restarts, refresh your browser and navigate back to the
Authentication Configuration > Step 1 of 2 page, and click Next at the bottom
of the page.

9.

Next to Authentication System, clickConfigure.

10. On the Authentication System page, select your Authentication System from the

drop-down list.

11. Type the Server Response Time-Out, and theSearch Time-Out.
12. Select Enabled next to Assign UPN (User Principal Name) if desired.
13. Click Apply to accept the changes orUndo to retain the previous settings.
14. Click Reboot Machine.

Configuring Authentication Server Settings for Kerberos

1.

In CentreWare Internet Services, clickProperties > Security > Remote Authentication
Servers > Kerberos Server
.

Xerox

®

Color 550/560/570 Printer

6-4

System Administrator Guide

Security