Xerox Color 550-560-570 Printer con Xerox CX Print Server powered by Creo-16023 - Manual (Page 42)

7. Click Apply.
SNMP Advanced Settings
Adding IP Trap Destination Addresses
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols >
SNMP.
2. Click Advanced at the bottom of the page.
3. Under Trap Destination Addresses, click Add UDP IPv4 Address, or Add UDP IPv6
Address.
4. Type the IP address of the host running the SNMP manager application to be used
to receive traps.
5. Under Traps, select the type of Traps to be Received by the SNMP manager.
6. Click Apply.
Note
Port 162/UDP is the default port for traps. You can select v1 or v2c based on what the
trap receiving system supports.
Adding IPX Trap Destination Addresses
Internetwork Packet eXchange (IPX) is a routing protocol used by Novell NetWare
environments.
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols >
SNMP.
2. Click Advanced at the bottom of the page.
3. Under Trap Destination Addresses, clickAdd IPX Address.
4. Type the 8-digit hexadecimal number that identifies the IPX External Network
host configured to receive the trap.
5. Type the 48-bit Physical MAC Address of the computer running the SMNP manager
application that is to receive the trap.
6. Type the IPX Socket Number of the computer running the SNMP manager
application configured to receive the packets.
7. Select the SNMP version, SNMP v1 or SNMP v2c based on the trap receiving system.
8. Under Traps, select the type of Traps to be Received by the SNMP manager.
LPD
The Line Printer Daemon (LPD)protocol is used to provide printer spooling and network
print server functionality for operating systems such as HP-UX, Linux, and MAC OS X.
Xerox ® Color 550/560/570 Printer 5-8
System Administrator Guide
Network Configuration