Xerox Color 550-560-570 Printer con Xerox CX Print Server powered by Creo-16023 - Manual (Page 155)

14
Secure Access
This section describes how to configure Xerox Secure Access using the USB card reader.
The USB card reader is connected directly to the USB port on this device. When the USB
card reader is connected to the device, the traditional Type A USB card reading device
is no longer required.
Pre-requisites
• Xerox Secure Access Unified ID System ®
• Device software
• Equitrac Provider and Libraries for USB Card Reader
Note
Plug-Ins can be downloaded from the Xerox website (www.xerox.com).
• Support Card and Cards Readers. Please see Xerox Secure Access documentation on
supported Card and Card Readers
• Configuration - SSL (Secure Socket Layer) has to be enabled
Note
Extensible Service Setup has to be enabled if the Xerox Extensible Interface Platform ®
application is used.
Installation
Connecting the USB Card Reader
Connect the USB Card Reader to the USB port on the device.
14-1 Xerox ® Color 550/560/570 Printer
System Administrator Guide