Xerox iGen4 Digital Press con Xerox EX Print Server Powered by Fiery-16492 - Manual

Customer Release Notes
FreeFlow Express to Print, Makeready, Process Manager, Web
Services, Print Manager, and Output Manager version 7.0 SP3
for the iGen4 ® 90/110 Digital Color Press with
Xerox EX Print Server version 1.0
Part Number: 45086735
08 July 2009
Copyright 2009 © Electronics for Imaging, Inc.
This document contains information about the installation and use of FreeFlow Express
to Print, Makeready, Process Manager, Web Services, Print Manager, and Output
Manager version 7.0 SP3, for the iGen4
® 90/110 Digital Color Press with
Xerox EX Print Server version 1.0.
The term “EX Print Server” is used to refer to the iGen4 ® 90/110 Digital Color Press with
Xerox EX Print Server version 1.0. The term “digital press” refers to the iGen4 digital press.
The FreeFlow enablement file is integrated in the EX Print Server system software.
You must also install the Fiery patch 1-1301PH, which can be downloaded to the
EX Print Server from System Updates, WebTools, or www.xerox.com. The patch contains
support for FreeFlow precut tabs, exception pages, inserts, covers, and selection of DFA
profiles in support of custom finishing.
The EX Print Server version 1.0 fully supports the following FreeFlow applications:
• FreeFlow Express to Print
• FreeFlow Makeready
• FreeFlow Process Manager
• FreeFlow Web Services
• FreeFlow Print Manager
• FreeFlow Output Manager