Xerox Color 550-560-570 Printer con Xerox CX Print Server powered by Creo-16023 - Manual (Page 16)

• Select your local time zone.
• Configure certification, system access level, SMTP, and LDAP
Configuration Report
After you complete the installation wizard, you can print a Configuration Report. The
Configuration Report lists the printer's current settings. For details, see Accessing the
Configuration Report.
System Administrator Access at the
Control Panel
To configure the printer from the control panel, press the Machine Status button, then
touch the Tools tab. If the printer is locked, log in as the system administrator.
To log in as a system administrator:
1. At the printer control panel, press the Log In/Out button.
2. Type admin and touch Next.
3. Type the administrator passcode and touch Enter. The default password is 1111.
Locking or Unlocking the Printer
To lock or unlock the printer:
1. At the printer control panel, press Machine Status and touch the Tools tab.
2. Touch Authentication / Security Settings > System Administrator Settings >
System Administrators Login ID.
3. Touch On to lock the printer or Off to unlock.
4. Touch Save.
Manually Setting the Printer's Ethernet
Interface Speed
The printer's Ethernet interface automatically detects the speed of your network. If your
network is connected to another auto-sensing device, such as a hub, the hub may not
detect the correct speed. Refer to the configuration page to make sure the printer has
detected the correct speed of your network. To view the configuration page, see Accessing
the Configuration Report.
Xerox ® Color 550/560/570 Printer 2-2
System Administrator Guide
Initial Setup