Xerox Color 550-560-570 Printer con Xerox CX Print Server powered by Creo-16023 - Manual (Page 33)

4. Load A3, A4, 11” x 17” or 8.5” x 11” and select Start on the screen to print the
calibration chart for the color correction.
5. Continue following the steps on the Control Panel screen.
6. To perform calibration, place the calibration chart face down with both magenta
patches against the left edge of the document glass.
7. Place 5 sheets or more of blank and white paper over the chart to prevent light from
bleeding through the sheet.
8. Lower the document glass and select Start on the screen.
9. Select Confirm.
10. Select Target. This can affect copy, DMP print or both.
4-3 Xerox ® Color 550/560/570 Printer
System Administrator Guide
Setting Image Quality for the Scanner