Xerox Color 550-560-570 Printer con Xerox CX Print Server powered by Creo-16023 - Manual (Page 27)

Auto Tray Switching Control
From the Paper Tray Settings area, you can set the alternative tray or paper to use when
running out of paper loaded in the selected tray.
Note
Not all Print Servers (DFEs) will adhere to this Auto Tray Switching feature setting.
1. At the printer Control Panel, make sure to log in as Administrator and then Access
the Paper Tray Settings screen.
2. Use the up or down arrow to select Auto Tray Switching.
3. You can select from Always Enable, Enable during Auto Select, and Enable for
Same Paper Type/Color. If Enable during Auto Select is selected, the machine
switches the tray when Auto Select is selected in the Copy screen or Paper Select
of the print driver.
You can select Targeted Paper Type (Copy Jobs) and select paper types. When
According to Priority Assigned is selected, the paper type is determined according
to the settings in Paper Type Priority. When selecting Selected Paper Type Only,
you can specify the paper type.
4. Touch Change Setting and make the selection. Touch Save.
The machine does not switch the tray automatically in the following cases:
• Tray 5 is selected.
• The tray containing paper other than plain paper, recycled paper, plain reload paper,
or
• The tray containing paper that is set as Auto Paper Off in Paper Type Priority is
selected.
Image Quality
The Image Quality feature provides a way to fine-tune the machine for paper weight.
You can specify the image quality processing method for: Plain, Recycled, Plain Reload,
Punched, Heavyweight, Heavyweight Reload, Hole Punched Heavyweight 1, Gloss, Gloss
Reload, HW Gloss, HW Gloss Reload, XHW Gloss, XHW Gloss Reload, Labels, X-HW Labels,
Tab Stock, Postcards, and Custom Paper 1 to 5.
When copying or printing a document, the machine applies the image quality settings
defined in the Paper Tray Attributes area of the Control Panel. The type of paper set
in Paper Tray Attributes, and the image quality processing method specified for that
type of paper, control the amount of ink transfer, speed, and fuser temperature applied.
3-7 Xerox ® Color 550/560/570 Printer
System Administrator Guide
Paper Tray Settings