Xerox Stampante digitale a colori Xerox 700i-700 con Integrated Fiery Color Server-15921 - Manual

Safety Notices
Part Number: 45061333
26 February 2007
Copyright 2007 © Electronics for Imaging, Inc.
Read these safety notes carefully before using this product to make sure you operate the
equipment safely.
Your EFI product has been designed and tested to meet strict safety requirements.
These include safety agency approval and compliance to established environmental
standards. Please read the following instructions carefully before operating the equipment.
The warning symbol ( ) indicates important information about circumstances that can
result in physical harm or danger to you or others.
Perchlorate material - Safety notice for users in California, U.S.
WARNING: The EFI product includes batteries that contain perchlorate, which is a
hazardous material that requires special handling according to California regulation.
For details and information, consult the State of California, Department of Toxic Substance
Control (DTSC) site: http://www.dtsc.ca.gov/hazardouswaste/perchlorate.
Space requirements
Make sure there is adequate space around the equipment for proper installation at your site.
You need a minimum of 8 inches (20 cm) at the back and sides. Be sure not to obstruct
ventilation openings.
Operator Accessible Areas
The equipment has been designed to restrict operator access to hazardous areas with covers,
which require a tool to remove. This is a safety feature. Never remove these covers, and never
insert or push objects of any kind into slots or openings on the equipment.
Cleaning your product
Before cleaning, unplug the equipment from the electrical outlet. Clean the Control Panel
with a soft cloth moistened with isopropyl alcohol or ethyl alcohol. Never use water or
ketone, as these may permanently alter the display.
The Control Panel is a liquid crystal display (LCD) that is made of glass and can break.
Do not subject it to strong shocks.
WARNING: If the Control Panel breaks and the liquid crystal material leaks out, do not
inhale, ingest, or touch it. If the material gets on your skin or clothing, wash off immediately
with soap and water.
Do not apply excessive pressure to the Control Panel; the pressure may alter the color of the
display.