Xerox DocuColor 242-252-260 con built-in Fiery controller-14683 - Manual

Customer Release Notes
FreeFlow Express to Print, Makeready, Process Manager,
Web Services, Print Manager, and Output Manager, version 8.0
for the Fiery Network Controller for
DocuColor 242/252/260, version 2.0
Part Number: 45087441
15 September 2009
Copyright 2009 © Electronics for Imaging, Inc.
This document contains information about the installation and use of FreeFlow Express
to Print, Makeready, Process Manager, Web Services, Print Manager, and Output
Manager, version 8.0, for the Fiery Network Controller for DocuColor 242/252/260,
version 2.0.
The term “Fiery” is used to refer to the Fiery Network Controller for DocuColor 242/252/
260 version 2.0. The term “copier” refers to the DocuColor 242/252 and DocuColor 260.
To connect user computers running FreeFlow applications to the Fiery, you must download
an enablement file. The enablement file for this product is 1-13LK3J.ps.
Download the FreeFlow enablement file to the Fiery from WebTools or www.xerox.com.
Once installed on the Fiery, the FreeFlow enablement file runs transparently, allowing you to
connect to and submit jobs to the Fiery using FreeFlow applications. It enables users to use
the entire suite of FreeFlow applications with the Fiery.
The Fiery, version 2.0 fully supports the following Freeflow applications:
• FreeFlow Express to Print
• FreeFlow Makeready
• FreeFlow Process Manager
• FreeFlow Web Services
• FreeFlow Print Manager
• FreeFlow Output Manager
N OTE : Although the installation method is similar to the way many patches are installed
on the Fiery, the FreeFlow enablement file is not a patch, and does not fix a defect.
For instructions on downloading and installing the FreeFlow enablement file, see
“Installation” on page 3.