Xerox Color 550-560-570 Printer con Xerox CX Print Server powered by Creo-16023 - Manual (Page 17)

To manually set the speed of the printer's Ethernet interface:
1. Log in as a system administrator.
2. At the printer control panel, press the Machine Status button, then touch the Tools
tab.
3. Touch System Settings > Connectivity + Network Setup > Protocol Settings.
4. Touch Ethernet Rated Speed and touch Change Settings.
5. Select the Speed to match the speed set on your hub or switch.
6. Touch Save, then touch Close.
Assigning a Network Address
By default, the printer automatically acquires a network address from a DHCP server.
To assign a static IP address, configure DNS server settings, or configure other TCP/IP
settings. Refer to TCP/IP.
Enabling Services and Options
Some services and options must be enabled before they can be used. To enable these
special services and options, use either the control panel or CentreWare Internet Services.
Enabling Services and Options at the Control Panel
1. At the printer control panel, press the Machine Status button and then touch the
Tools tab.
2. Touch System Settings > Common Service Settings > Maintenance.
3. Touch Software Options.
4. Touch Keyboard.
5. Type the code and touch Save.
6. Touch Close.
Enabling Services and Options in CentreWare Internet
1. In CentreWare Internet Services, click Properties > Security > Feature Enablement.
2. Type the Unique Function Code.
3. Click Apply.
4. Touch Reboot.
2-3 Xerox ® Color 550/560/570 Printer
System Administrator Guide
Initial Setup