Xerox Color 550-560-570 Printer con Xerox CX Print Server powered by Creo-16023 - Manual (Page 158)

11. Check that the status for each Plug-Ins displays “Activated”.
Update Plug-In Feature
De-activate Plug-In
Note
De-activate a Plug-in if an older version of the Plug-in has already been installed.
1. At your workstation, open the web browser and enter the IP address of the device
in the address bar.
2. Press Enter.
3. Click on the Properties tab.
4. If prompted, enter the system administrator’s User Name and Password. The default
is admin and 1111.
5. Click on OK.
6. Select the Security link.
7. Select the Plug-in Settings link.
8. Select List of Embedded Plug-ins in the directory tree.
9. Select the plug-in to de-activate.
10. Click on the Stop button
11. Click on the OK button when the “Do you want to deactivate the selected plug-in”
message displays.
Note
The above steps should only be used if an older version of the Plug-ins has already
been installed.
12. Reboot the machine to deactivate the current plug-in:
13. Click on the Status tab.
14. Click on the Reboot Machine button.
15. Click on OK when the Do you want to reboot? message displays.
Activate Plug-In
1. At your workstation, open the web browser and enter the IP address of the device
in the address bar.
2. Press Enter.
3. Click on the Properties tab.
4. If prompted, enter the system administrator’s User Name and Password. The default
is admin and 1111.
5. Click on OK.
6. Select the Security link.
7. Select the Plug-in Settings link.
8. Select List of Embedded Plug-ins in the directory tree.
Xerox ® Color 550/560/570 Printer 14-4
System Administrator Guide
Secure Access