Dns configuration for ipv4, Zero-configuration networking, Configuring settings for ipv6 – Xerox Color 550-560-570 Printer con Xerox CX Print Server powered by Creo-16023 User Manual
Page 38

6. Type a valid Domain Name.
DNS Configuration for IPv4
1.
Next to Obtain DNS Server Address Automatically, select the Enabled check box
to allow your DHCP server to provide the DNS server address. Clear the check box
to manually provide the DNS server address, and type an IP address for the Preferred
DNS Server, Alternate DNS Server 1, and Alternate DNS Server 2 in the appropriate
fields.
Note
If DHCP or BOOTP is the IP Address Resolution setting, you cannot change the
Domain Name, Primary DNS Server, Alternate DNS Server 1, and Alternate DNS
Server 2 settings.
2.
Next to Dynamic DNS Registration (DDNS), selectEnabled to register the printer's
host name in the DNS server. Select Overwrite if you want to overwrite existing
entries in the DNS server.
Note
If your DNS Server does not support dynamic updates, you do not need to enable
DDNS.
3.
Next to Generate Domain Search List Automatically, select Enabled if you want
the printer to generate a list of search domains. Type the domain names if the
option is disabled.
4.
Next to Connection Time-Out, type the time allowed until the printer stops
attempting to connect to the server.
5.
Next to Release IP Address, select Enabledif you want the printer to release its IP
address when it restarts.
Zero-Configuration Networking
1.
If the printer cannot connect to a DHCP server to obtain an IP address, select Self
Assigned Address to allow the printer to assign itself a Link-Local address. Link-Local
addresses are between 169.254.0.0 and 169.254.255.255.
2.
Click Apply.
Configuring Settings for IPv6
IPv6 hosts can automatically configure themselves when connected to a routed IPv6
network using the Internet Control Message Protocol Version 6 (ICMPv6). ICMPv6
performs error reporting for IP along with other diagnostic functions. When first
connected to a network, a host sends a link-local multicast router solicitation request
for its configuration parameters. If suitably configured, routers respond to this request
with a router advertisement packet containing network-layer configuration parameters.
Xerox
®
Color 550/560/570 Printer
5-4
System Administrator Guide
Network Configuration
- Color 550-560-570 Printer con Xerox EX Print Server powered by Fiery-16032 Color 550-560-570 Printer con Xerox FreeFlow Print Server-16042 Color 550-560-570 Printer con integrated Fiery Color Server-16015 Color 550-560-570 Printer con built-in controller-16010 Color 550-560-570 Printer with Xerox CX Print Server powered by Creo-6999 Color 550-560-570 Printer with Xerox FreeFlow Print Server-7052 Color 550-560-570 Printer with integrated Fiery Color Server-6970 Color 550-560-570 Printer with built-in controller-6951 Color 550-560-570 Printer with Xerox EX Print Server powered by Fiery-7022 Color 550-560-570 Printer mit Xerox FreeFlow Print Server-10418 Color 550-560-570 Printer mit Xerox EX Print Server powered by Fiery-10407 Color 550-560-570 Printer mit built-in controller-10381 Color 550-560-570 Printer mit integrated Fiery Color Server-10388 Color 550-560-570 Printer mit Xerox CX Print Server powered by Creo-10397 Color 550-560-570 Printer with integrated Fiery Color Server-6972 Color 550-560-570 Printer with Xerox CX Print Server powered by Creo-7005 Color 550-560-570 Printer with Xerox FreeFlow Print Server-7054 Color 550-560-570 Printer with built-in controller-6953 Color 550-560-570 Printer with Xerox EX Print Server powered by Fiery-7024