Xerox Stampante digitale a colori Xerox 700i-700 con Xerox EX Print Server powered by Fiery-15952 - Manual

Customer Release Notes
FreeFlow Express to Print, Makeready, Process Manager, Web
Services, Print Manager, and Output Manager version 7.0 SP3
for the Xerox EX Print Server, Powered by Fiery,
for the Xerox 700 Digital Color Press version 1.5
Part Number: 45086733
08 July 2009
Copyright 2009 © Electronics for Imaging, Inc.
This document contains information about the installation and use of FreeFlow Express
to Print, Makeready, Process Manager, Web Services, Print Manager, and Output
Manager version 7.0 SP3, for the Xerox EX Print Server, Powered by Fiery, for the
Xerox 700 Digital Color Press version 1.5.
The term “EX Print Server” is used to refer to the Xerox EX Print Server, Powered by Fiery,
for the Xerox 700 Digital Color Press version 1.5. The term “digital press” refers to the
Xerox 700 Digital Color Press.
To connect user computers running FreeFlow applications to the EX Print Server, you
must download an enablement file. The enablement file for this product is 1-12RHJ1.exe.
The FreeFlow enablement file can be downloaded to the EX Print Server from System
Updates, WebTools, or www.xerox.com. Once installed on the EX Print Server, the FreeFlow
enablement file runs transparently, allowing you to connect to and submit jobs to the
EX Print Server using FreeFlow applications. It enables users to use the entire suite of
FreeFlow applications with the EX Print Server.
The EX Print Server version 1.5 fully supports the following Freeflow applications:
• FreeFlow Express to Print
• FreeFlow Makeready
• FreeFlow Process Manager
• FreeFlow Web Services
• FreeFlow Print Manager
• FreeFlow Output Manager
N OTE : Although the installation method is similar to the way many patches are installed on
the EX Print Server, the FreeFlow enablement file is not a patch and does not “fix” a “defect.”
For instructions on downloading and installing the FreeFlow enablement file, see
“Installation” on page 3.