Xerox Color 550-560-570 Printer con Xerox CX Print Server powered by Creo-16023 - Manual (Page 35)

5
Network Configuration
TCP/IP
Transmission Control Protocol (TCP) and Internet Protocol (IP) are a two protocols within
the Internet Protocol Suite. IP manages the transmission of messages from computer
to computer while TCP manages the actual end-to-end connections.
Note
You can configure IPv4 settings at the printer control panel or through CentreWare
Internet Services. You can only configure IPv6 through CentreWare Internet Services.
Enabling TCP/IP
Note
By default, TCP/IP is enabled. If you disable TCP/IP, you must enable it at the printer
control panel before you can access CentreWare Internet Services.
1. At the printer control panel, press the Machine Status button, then touch the Tools
tab.
2. Touch Connectivity and Network Setup > Protocol Settings.
3. Touch TCP/IP - IP Mode, then touch Change Settings.
4. Touch IPv4 Mode,IPv6, or Dual Stack to enable both IPv4 and IPv6.
5. Touch Save.
Configuring TCP/IP Settings at the Control Panel
Manually Configuring an IPv4 Network Address
1. At the printer control panel, press the Machine Status button, then touch the Tools
tab.
2. Touch Connectivity and Network Setup > Protocol Settings.
5-1 Xerox ® Color 550/560/570 Printer
System Administrator Guide