Xerox Color 550-560-570 Printer con Xerox CX Print Server powered by Creo-16023 - Manual (Page 45)

Optional Information
1. To improve transmission speed, you can set messages to be fragmented between
2 and 500 times. Select Enabled next to Split Send and enter the number of
fragments in the Maximum Split Count field.
2. If you enable Split Send, you can select how the email jobs should be split. Under
Split Send Method, select one of the following:
• Split into Pages: If you select this option, the mail client will not reassemble the
job on receipt.
• Split by Data Size: If you select this option, the mail client is required to
reassemble the job on receipt.
3. To define a maximum message size for messages with attachments, type a value
between 512 KB and 20480 KB next to Maximum Data Size per E-mail. The default
size is 10240 KB.
4. To set a maximum job size, type a value between 512 KB and 2000000 KB next to
Maximum Total Data Size.
5. Under Login Credentials for the Machine to Access the SMTP Server to send
automated emails select POP before SMTP, or SMTP AUTH to have the printer
authenticate itself using the Login Name and Password set up on this page. If you
select None, the printer will not provide authentication credentials to SMTP server.
6. If you select System for Login Credentials for the Machine to Access the SMTP
Server to send automated e-mails, type in the Login Name and Password. Retype
the password to confirm.
7. If authentication is enabled, and the printer is configured to require users to log in
before they can access email, select Remotely Authenticated User under Login
Credentials for Sending E-mails to use the credentials of the user to access the
SMTP server. Select System to allow this field to default to the same setting you
selected for sending automated email messages.
8. Click Apply.
LDAP
Lightweight Directory Access Protocol (LDAP) is a protocol used to process queries and
updates to an information directory, also known as an LDAP directory, stored on an
external server. LDAP directories are heavily optimized for read performance. Use this
page to define how the printer retrieves user information from an LDAP directory.
Configuring LDAP/LDAPS Server Settings
1. In CentreWare Internet Services, clickProperties > Connectivity > Protocols > LDAP
> LDAP Server.
5-11 Xerox ® Color 550/560/570 Printer
System Administrator Guide
Network Configuration