Xerox Color 550-560-570 Printer con Xerox CX Print Server powered by Creo-16023 - Manual (Page 39)

Note
IPv6 is optional and may be used in addition to or in place of IPv4. If both protocols are
disabled, you cannot access CentreWare Internet Services. The host name is the same
for IPv4 and IPv6. If you change the host name for IPv6, the host name changes for
IPv4 as well.
Caution
If both IPv4 and IPv6 are disabled, you cannot access CentreWare IS. You must reenable
TCP/IP at the printer control panel before you can access CentreWare IS. Disabling
TCP/IP or changing the IP address also disables any dependent protocols.
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols >
TCP/IP.
2. UnderIP Mode, select IPv6, or select Dual Stack to use both IPv4 and IPv6. By
default, IPv6 is disabled.
3. Next to Enable Manual Address, select Enabled if you want to manually assign an
address. Type the IP Address and Gateway Address.
4. Next to Get IP Address from DHCP, select Enabled to allow your DHCP server to
assign an IP address to the printer.
5. Type the required Domain Name.
Note
Enabling or disabling IPv6 will restart the printer when you click Apply.
DNS Configuration for IPv6
1. Next to Obtain IPv6 DNS Server Address Automatically, select Enabled to allow
the DHCP server to provide the DNS server address.
2. Type an IP address for the Preferred DNS Server, Alternate DNS Server 1, and
Alternate DNS Server 2.
3. Next to Dynamic DNS Registration, select Enabled to enable, select Overwrite to
replace the existing DNS entry.
4. Next to Generate Domain Search List Automatically, select Enabled to enable.
5. Type Domain Name 1, 2 and 3.
6. Enter the number of seconds until Connection Time-Out.
5-5 Xerox ® Color 550/560/570 Printer
System Administrator Guide
Network Configuration