Xerox Color 550-560-570 Printer con Xerox CX Print Server powered by Creo-16023 - Manual (Page 156)

Configuring the USB Card Reader
1. At your workstation, open the web browser and enter the IP address of the device
in the address bar.
2. Press Enter.
3. Click on the Properties tab.
4. If prompted, enter the system administrator’s User Name and Password. The default
is admin and 1111.
5. Click on OK.
6. Select the Security link.
7. Select the Plug-in Settings link.
8. Select Plug-in Settings in the directory tree.
9. In the Plug-in Settings area:
10. Check the Enabled checkbox for Plug-in Settings.
11. Click on Apply.
12. Click on Reboot Machine when the reboot message is displayed on the screen for
the new settings to take effect.
13. Click on OK when the Do you want to reboot? message displays.
Upload the Equitrac Provider and Libraries
1. At your workstation, open the web browser and enter the IP address of the device
in the address bar.
2. Press Enter.
3. Click on the Properties tab.
4. If prompted, enter the system administrator’s User Name and Password. The default
is admin and 1111.
5. Click on OK.
Xerox ® Color 550/560/570 Printer 14-2
System Administrator Guide
Secure Access