Physio-Control LIFEPAK 15 - Manual (Page 32)

3-14
LIFEPAK 15 Monitor/Defibrillator Operating Instructions
Back View
Note: To prevent inadvertent depletion of the defibrillator batteries, disconnect external devices
from the system connector when not in use.
Table 3-6 Back View
LABEL DESCRIPTION FOR MORE INFORMATION
Battery wells, pins,
and contacts Each well holds one Lithium-ion battery. Two
pins in each well transfer the battery power.
Battery contacts transfer battery status
information. See page 10-12
CO
2
exhaust port Connects to a scavenger system when
monitoring EtCO
2
during use of anesthetics.
See page 4-45
Standard paddle wells,
retainers, and test
contacts Paddle wells stow standard (hard) paddles.
Retainers provide secure retention and quick
removal of the paddles. Test contacts allow
complete paddles defibrillation checks
according to the Operator’s Checklist. See page 6-6 and
Operator’s Checklist
in
the back of this manual
USB port cover Protects USB port from the environment. For future use
System connector Connects device to a gateway or external
computer for transfer of patient reports. Also
provides real-time ECG output. See page 7-3
Auxiliary power
connector Connects to an optional AC or DC power
adapter. Allows use of auxiliary power source. See page 9-3
WARNING
SHOCK HAZARD
If you are monitoring a patient and using the system connector, all equipment
connected to the system connector must be battery powered or electrically isolated
from AC power according to EN 60601-1. If in doubt, disconnect the patient from the
defibrillator before using the system connector. Only use Physio-Control recommended
data transmission cables. For more information, contact Physio-Control Technical
Support.