Re-establishing a bluetooth connection, Terminating a bluetooth connection, Data transmission – Physio-Control LIFEPAK 15 User Manual

Page 187

DATA TRANSMISSION

LIFEPAK 15 Monitor/Defibrillator Operating Instructions

8-9

Re-establishing a Bluetooth Connection

The LIFEPAK 15 monitor retains in its memory two last-connected devices, limited to one in each

mode—one for cardiac care (AED or Manual mode) and one for Archive mode. When the

LIFEPAK 15 monitor is powered on and the wireless feature is set to

WIRELESS ON

, the monitor

automatically searches for the last connected device. If the last connected device in that mode is

turned on and within range, a connection is established automatically. When a connection is

established, the Bluetooth LED is illuminated and

CONNECTED TO (DEVICE NAME)

appears in the

message area.

Note:

RESET DEFAULTS

is selected in Setup mode, the Bluetooth passcode is not reset. However,

connections to the last-connected devices are reset (terminated). To re-establish a connection, use

FIND DEVICES

Terminating a Bluetooth Connection

When the Bluetooth LED is illuminated, the LIFEPAK 15 monitor has a wireless connection

established with another Bluetooth device.

To terminate a Bluetooth connection:

1. Use the

SPEED DIAL

to select the Bluetooth icon and access the Bluetooth Setup menu.

2. Select

DISCONNECT

. The Bluetooth connection is terminated and is not retained as the last

connected device.