Physio-Control LIFEPAK 15 - Manual (Page 168)

7-4
LIFEPAK 15 Monitor/Defibrillator Operating Instructions
Patient Records and Reports
CODE SUMMARY Report
The LIFEPAK 15 monitor/defibrillator automatically stores a CODE SUMMARY report as part of the
Patient Record for each patient. The CODE SUMMARY report can be set up to always print in a
particular format. The available formats are shown in Table 7-2. For CODE SUMMARY setup
information, see the LIFEPAK 15 Monitor/Defibrillator Setup Options provided with your device.
To generate a CODE SUMMARY report, press CODE SUMMARY . If you interrupt printing of a CODE
SUMMARY report, the entire CODE SUMMARY report is reprinted when printing is resumed. “Code
Summary Complete” prints immediately following the last waveform event.
Continuous
Report
2
Provides real-time waveform data, acquired when the
device is powered on and electrodes are connected or
other waveform data is displayed in channels 2 or 3. Only
for post-event review with CODE-STAT or DT EXPRESS
software.
X
1 Transmission of a 12-lead ECG report automatically includes transmission of the Vital Signs Summary.
2 To obtain CPR analytics using CODE-STAT software, the patient’s ECG must be monitored using PADDLES lead in Channel 1.
Note: All reports that are transmitted to the LIFENET System include the following information:
• Battery status
• Power adapter status
• Device usage information
• Manufacturing configuration settings
• 3:00 A.M. self-test results
Table 7-2 CODE SUMMARY Formats
FORMAT ATTRIBUTES
Long format • Preamble
• Event/vital sign log
• Event waveforms
• 12-lead ECG reports
• Trend Summary
Medium format • Preamble
• Event/vital sign log
• Event waveforms
• Trend Summary
Short format • Preamble
• Event/vital sign log
• Trend Summary
Table 7-1 Report Types (Continued)
REPORT TYPE DESCRIPTION
PRINT
FROM
MONITOR
TRANSMIT