Physio-Control LIFEPAK 15 - Manual (Page 185)

DATA TRANSMISSION
8
©2007-2013 Physio-Control, Inc. LIFEPAK 15 Monitor/Defibrillator Operating Instructions
8-7
The various PSC prefixes correspond to LIFEPAK 15 monitor modes of operation. Table 8-2 lists
the LIFEPAK 15 monitor modes and the service class and friendly name prefix that is discoverable
in each mode. For example, when the LIFEPAK 15 monitor is in Archive mode and the filter is on,
it can discover devices whose friendly names begin with A_ or B_.
For information about configuring the friendly name in your target devices, see the documentation
provided with those devices.
Bluetooth Setup
Use the Bluetooth Setup menu to set up the Bluetooth transmission on the LIFEPAK 15 monitor.
To access the Bluetooth Setup menu:
Note: The default setting for WIRELESS is ON , and the default setting for SEARCH FILTER is OFF . Use the
WIRELESS setting to turn off the wireless signal when operating the LIFEPAK 15 monitor in an
environment where transmission is not desirable.
Table 8-2 Physio Service Class Prefixes
LIFEPAK 15 MONITOR/DEFIBRILLATOR MODE SERVICE CLASS
FRIENDLY NAME
PREFIX
LIFEPAK 15 monitor must be in Archive mode Archive A_
LIFEPAK 15 monitor can be in AED, Manual, or
Archive mode Both Cardiac Care and
Archive
B_
LIFEPAK 15 monitor can be in AED or Manual
mode
Cardiac Care C_
Bluetooth Setup
Connect
Search Filter
Passcode...
Wireless
Disconnect
(Not Connected)
On
0000
On
LIFEPAK 15 Device ID: LP151234
1. On the HOME SCREEN, rotate the SPEED DIAL to
outline the Bluetooth icon.
2. Press the SPEED DIAL. The Bluetooth Setup
menu appears.
3. Set SEARCH FILTER to ON if you want to find
only devices that include the PSC in their
friendly name; otherwise, set SEARCH FILTER
to OFF.
4. Set a Bluetooth passcode.
• To transmit to a headless gateway, enter
the passcode that is preconfigured in the
gateway.
• To transmit to a PC, you may need to enter
a passcode or acknowledge the
connection.
5. Ensure that WIRELESS is set to ON.