Physio-Control LIFEPAK 15 - Manual (Page 27)

BASIC ORIENTATION
3
©2007-2013 Physio-Control, Inc. LIFEPAK 15 Monitor/Defibrillator Operating Instructions
3-9
Area 5
Figure 3-6 Area 5 Connectors, Speaker, and Printer
Note: If your LIFEPAK 15 monitor/defibrillator is configured for temperature monitoring, P1 and P2
are replaced by a single port labeled TEMP. For more information about temperature monitoring,
see page 4-61.
Table 3-5 Area 5 Connectors, Speaker, and Printer
LABEL DESCRIPTION FOR MORE INFORMATION
CO2 FilterLine ® set port See page 4-45
SpO2/SpCO/SpMet Sensor cable port See page 4-25
NIBP Pneumatic tubing port See page 4-37
ECG Green electrically isolated ECG cable port See page 4-3
P1 Invasive pressure cable port See page 4-54
P2 Invasive pressure cable port See page 4-54
Speaker Projects device tones and voice prompts
Printer Door for 100 mm printer paper See page 10-17
Therapy cable
receptacle QUIK-COMBO ® therapy cable and standard (hard)
paddles cable receptacle
See page 3-12
Speaker Printer Therapy cable receptacle
CO
2
SpO
2
/
SpCO/
SpMet
NIBP
ECG
P1
P2
CO2
SpO2
NIBP
ECG
P1
P2
See warnings page 2-4