NEC PD78F9488 - Manual (Page 375)

User’s Manual U15331EJ4V1UD
375
APPENDIX B NOTES ON TARGET SYSTEM DESIGN
Figures B-1 to B-6 show the conditions when connecting the emulation probe to the conversion adapter or
conversion socket. Follow the configuration below and consider the shape of parts to be mounted on the target
system when designing a system.
Of the products described in this chapter, the NP-80GC, NP-80GC-TQ, NP-H80GC-TQ, NP-80GK and NP-H80GK-
TQ are products of Naito Densei Machida Mfg. Co., Ltd, and the TGC-080SBP and TGK-080SDP are products of
TOKYO ELETECH CORPORATION.
Table B-1. Distance Between IE System and Conversion Adapter
Emulation Probe Conversion Adapter Distance Between IE System and Conversion Adapter
NP-80GC-TQ 170 mm
NP-H80GC-TQ
TGC-080SBP
370 mm
NP-80GK 170 mm
NP-H80GK-TQ
TGK-080SDP
370 mm
(1) NP-80GC, NP-80GC-TQ, NP-H80GC-TQ
Figure B-1. Distance Between In-Circuit Emulator and Conversion Socket (80GC)
170 mm
Note
In-circuit emulator
IE-78K0S-NS or IE-78K0S-NS-A
Emulation board
IE-789488-NS-EM1
Conversion adapter: TGC-080SBP
Target system
TGCN1
Emulation probe
NP-80GC-TQ
NP-H80GC-TQ
Note Distance when NP-80GC-TQ is used. When NP-H80GC-TQ is used, the distance is 370 mm.