NEC PD78F9488 - Manual (Page 373)

APPENDIX A DEVELOPMENT TOOLS
User’s Manual U15331EJ4V1UD
373
A.5 Debugging Tools (Hardware)
IE-78K0S-NS
In-circuit emulator In-circuit emulator for debugging hardware and software of an application system using the
78K/0S Series. Can be used with the integrated the debugger ID78K0S-NS. Used in
combination with an AC adapter, emulation probe, and interface adapter for connecting the host
machine.
IE-78K0S-NS-A
In-circuit emulator The IE-78K0S-NS-A provides a coverage function in addition to the IE-78K0S-NS functions, thus
enhancing the debug functions, including the tracer and timer functions.
IE-70000-MC-PS-B
AC adapter Adapter for supplying power from AC 100 to 240 V outlet.
IE-70000-98-IF-C
Interface adapter Adapter necessary when using a PC-9800 series PC (except notebook type) as the host machine
(C bus supported)
IE-70000-CD-IF-A
PC card interface PC card and interface cable necessary when using a notebook PC as the host machine
(PCMCIA socket supported)
IE-70000-PC-IF-C
Interface adapter Interface adapter necessary when using an IBM PC/AT compatible as the host machine (ISA bus
supported)
IE-70000-PCI-IF-A
Interface adapter Adapter necessary when using a personal computer incorporating a PCI bus as the host machine
IE-789488-NS-EM1
Emulation board Board for emulating the peripheral hardware inherent to the device. Used in combination with an
in-circuit emulator.
NP-80GC
Emulation probe Cable to connect the in-circuit emulator and target system.
Used in combination with the EV-9200GC-80.
EV-9200GC-80
Conversion
socket
Conversion socket to connect the NP-80GC and a target system board on which an 80-pin plastic
QFP (GC-8BT type) can be mounted.
NP-80GC-TQ
NP-H80GC-TQ
Emulation prove Cable to connect the in-circuit emulator and target system.
Used in combination with the TGC-080SBP.
TGC-080SBP
Conversion
adapter
Conversion adapter to connect the NP-80GC-TQ or NP-H80GC-TQ and a target system board on
which an 80-pin plastic QFP (GC-8BT type) can be mounted.
NP-80GK
NP-H80GK-TQ
Emulation prove Cable to connect the in-circuit emulator and target system.
Used in combination with the TGK-080SDW.
TGK-080SDW
Conversion
adapter
Conversion adapter to connect the NP-80GK or NP-H80GK-TQ and a target system board on
which an 80-pin plastic TQFP (GK-9EU type) can be mounted
Remarks 1. The NP-80GC, NP-80GC-TQ, NP-H80GC-TQ, NP-80GK, and NP-H80GK-TQ are products of Naito
Densei Machida Mfg. Co., Ltd. (TEL +81-45-475-4191).
2. The TGC-080SBP and TGK-080SDW are products of TOKYO ELETECH CORPORATION.
For further information, contact: Daimaru Kogyo, Ltd.
Tokyo Electronics Department (TEL +81-3-3820-7112)
Osaka Electronics Department (TEL +81-6-6244-6672)