Siemens HiPath Xpressions Unified Messaging - Manual (Page 166)

Mailbox Processing on the Telephone and the Voice Mail Service Voicemail
A31003-S2330-B690-2-7619, January 2003
3-6 HiPath Xpressions V3.0, User Manual
General
3.1.9.4 Terminating the Connection
– PhoneMail
You can terminate the connection to the mailbox at any time:
The messages are sent when the connection is terminated if you have recorded new messages
(Section 3.2.3.4, “Recording and Sending Messages”).
– VMS
You can terminate the connection to the mailbox at any time:
If you have recorded a new message and this was the last action prior to terminating the con-
nection, this message will be sent when the connection is terminated.
3.1.9.5 Returning to the Main Menu (VMS)
You have opened a submenu and want to quit this menu and return to the main menu:
You can use this key combination as an Escape function in the event that you "get lost" in the
system. In other words, if you find yourself in the awkward situation of no longer knowing where
you are in the menu, you can use the Escape function to return to a defined state from where
you are continue your operations.
Replace the handset.
or
* 7 6 Push the star key, 7 and 6 in succession.
This can be used while messages, greetings and the user’s own name
are being recorded (for forward access and guest access).
Replace the handset
or
0 # Go to the main menu and push the 0 key and the pound key in succes-
sion.
0 * Finishing and returning to the main menu:
Push the 0 key and the star key in succession (first you may have to can-
cel any settings that you already made by pushing the star key).