Motorola Series Switch WS5100 - Manual (Page 93)

Network Setup 4-19
4. The Status is the current state of requests made from the applet. Requests are any “SET/GET” operation
from the applet. The Status field displays error messages if something goes wrong in the transaction
between the applet and the switch.
5. Click the Refresh button to refresh the virtual interface statistics. Status information is not polled to the
applet. Hence you have to refresh the switch to retrieve the data.
6. Click the Close button to exit the screen. Clicking Close does not lose any data, as there are no values
configured within this screen (it is read-only).
4.4.2.2 Viewing the Virtual Interface Statistics Graph
The switch Web UI continuously updates its virtual interface statistics, even when the graph is closed.
Periodically display the virtual statistics graph for the latest information.
To view detailed graphical statistics for a selected interface:
1. Select a record from the table displayed in the Statistics screen.
2. Click the Graph button.
3. The Interface Statistics screen displays. The Interface Statistics screen provides the option of viewing
graphical statistics for the following parameters:
• Input Bytes
• Input Pkts Dropped
• Output Pkts Total
• Output Pkts Error
• Input Pkts Total
• Input Pkts Error
• Output Pkts NUCast
• Input Pkts NUCast
• Output Bytes
• Output Pkts Dropped
Select any of the above parameters by clicking on the checkbox associated with it.
Output Packets
Dropped Displays the number of transmitted packets dropped at the interface. Output Packets
Dropped are the packets dropped when the output queue of the physical device associated
with interface is saturated.
Output Packets Error Displays the number of transmitted packets with errors at the interface. Output Packet Errors
are the sum of all the output packet errors, malformed packets and misaligned packets
received on an interface.