Motorola Series Switch WS5100 User Manual
Page 111
Network Setup
4-37
3. Click the
Edit
button.
4. Select either the
EAP 802.1x, Hotspot
or
Dynamic MAC ACL
button from within the Authentication
field. This enables the
Radius Conig...
button at the bottom of the Network > Wireless LANs > Edit
screen.
5. Select the
Radius Conig...
button. The Radius Configuration screen displays for defining an external
Radius Server.
6. Refer to the
Server
field and define the following credentials for a primary and secondary Radius server.
RADIUS Server
Address
Enter the IP address of the primary and secondary server acting as the Radius user
authentication data source.
RADIUS Port
Enter the TCP/IP port number for the primary and secondary server acting as the Radius user
authentication data source. The default port is 1812.
RADIUS Shared
Secret
Provide a shared secret (password) for user credential authentication with the primary or
secondary Radius server.
Server Timeout
Enter a value (between 1 and 60 seconds) to indicate the number of elapsed seconds causing
the switch to time out on a request to the primary or secondary server.
Server Retries
Enter a value between 1 and 10 to indicate the number of times the switch attempts to reach
the primary or secondary Radius server before giving up.