Motorola Series Switch WS5100 - Manual (Page 260)

6-36 WS5100 Series Switch System Reference Guide
.
3. Refer to the following information to assess the validity and total NAT translation configurations
available to the switch.
4. Click on the Export button to export the contents of the table to a Comma Separated Values file (CSV).
6.7 Configuring IKE Settings
IKE (also known as ISAKMP) is the negotiation protocol enabling two hosts to agree on how to build an IPSec
security association. To configure the security appliance for virtual private networks, set global IKE
parameters that apply system wide and define IKE policies peers negotiate to establish a VPN tunnel.
IKE protocol is an IPSec standard protocol used to ensure security for VPN negotiation, and remote host or
network access. IKE provides an automatic means of negotiation and authentication for communication
between two or more parties. IKE manages IPSec keys automatically for the parties.
The switch IKE configuration process is decided into the following activities:
• Defining the IKE Configuration
• Setting IKE Policies
• Viewing SA Statistics
Inside-Global Displays the internal global pool of addresses (allocated out of the switch’s private address
space but relevant to the outside) you are trying to prevent from being exposed to the outside
world.
Inside Local Displays the internal local pool of addresses (addresses internal to the switch) you are trying
to prevent from being exposed to the outside world.
Outside-Global The IP address of an outside host as it appears to the inside network.
Outside-Local The configured IP address assigned to a host in the outside network.