Motorola Series Switch WS5100 User Manual
Page 92
4-18 WS5100 Series Switch System Reference Guide
2. Click the
Details
button.
3. The
Interface Statistics
screen displays with the following content:
Name
Displays the title of the logical interface selected.
MAC Address
Displays physical address information associated with the interface. This address is read-
only (hard-coded at the factory) and cannot be modified.
Input Bytes
Displays the number of bytes received by the interface.
Input Unicast
Packets
Displays the number of unicast packets (packets directed towards the interface) received in
the interface.
Input NonUnicast
Packets
Displays the number of NonUnicast Packets (Multicast and Broadcast Packets) received at
the interface.
Input Total Packets
Displays the total number of packets received at the interface.
Input Packets
Dropped
Displays the number of received packets dropped at the interface by the input Queue of the
hardware unit /software module associated with the VLAN interface. Packets are dropped
when the input Queue of the interface is full or unable to handle incoming traffic.
Input Packets Error
Displays the number of received packets with errors at the interface. Input Packet Errors are
input errors occurring due to; no buffer space/ignored packets due to broadcast storms,
packets larger than maximum packet size, framing errors, input rate exceeding the receiver's
date handling rate or cyclic redundancy check errors. In all these cases, an error is reported.
Output Bytes
Displays the number of bytes transmitted from the interface.
Output Unicast
Packets
Displays the number of unicast packets (packets directed towards a single destination
address) transmitted from the interface.
Output NonUnicast
Packets
Displays the number of unicast packets transmitted from the interface.
Output Total Packets
Displays the total number of packets transmitted from the interface.